How to Wire a Heated Snowmobile Helmet? [Take Extra Protection]

The right gear can create a huge variance between having fun and being safe on the trail. Electric shields are becoming increasingly popular because they give you extra protection in case of an emergency without sacrificing clear vision, which is important when riding off-road or cutting through the snow!

There are two options for powering your shield. One option is a battery pack that powers the heat to keep it at optimum temperature. And other helmets have wires connected directly from their accessory outlet, onto which you can plug in an external device. Let’s find out how to wire a heated snowmobile helmet and how to clean the visor properly.

Now, it is important to purchase a modular snowmobile helmet that includes the option for an electric shield. If your chosen helmet does not, you will need to buy one separately at an additional cost and install it yourself – which can be expensive if not done correctly!

How to Wire a Heated Snowmobile Helmet?

For those who enjoy riding in the snow, their helmet must have all possible accessory power options. To find out what your particular model offers and whether this will work with your snowmobile’s engine. You should investigate both features of each product, and its compatibility with other parts on board!

How to Wire a Heated Snowmobile Helmet

The wire connecting your hot weather motorcycle helmet to the snowmobile is similar in design and functions like an RCA cable. This single-cable allows for easy connection/disconnection, which isn’t possible with two separate wires because they would get mixed up during use – especially when wearing thick gloves!

See also  What Are Football Helmets Made of? [Heads Don’t Bounce]

Let’s go to the step of how to wire up a heated helmet to a snowmobile! Once you’ve pulled your hood off, locate the blue wire with an adhesive label that says “Heated Shield”. Attach this plug to either side of your heated shield and make sure it can withstand heat (do not touch them). Afterward, run any excess length back through a fuse box or shorting block on its way up towards where ever you want for power/data transmission purposes!

Shield cord kit includes all wiring needed to connect your sled, including a 2-piece helmet-to sled for easy disconnect. Shield battery lead with female RCA can convert any electric shield and fits many other brands of modular helmets that use incorporate this type of plug-in style wiring board like HJC G Max etc. A must-have when you want a quiet adventure without compromising safety.

Talking of safety, breathing can be an issue while riding through snow, as it can cause issues in the throat and lungs. In that case, snowmobile helmets with breath boxes come handy as you can breathe easily through them.

Care & Cleaning Tips for Snowmobile Helmet

After learning how to wire a snowmobile for a heated helmet, let’s jump to some care and cleaning tips. “Motorcycle helmets are worn to protect against all sorts of dangers, but the most important job is protecting your head and its contents.”

They’re “constantly pounded by wear-and-tear on the road, which can lead to a scary interior lining” if you don’t clean yours out regularly! Knowing how will help keep dirt from accumulating inside as well extend their lifetime!

See also  How Do Motorcycle Helmets Prevent Concussions?

The steps below on how to clean a snowmobile helmet are most certainly worth following, as they have been proven time and again.

Care & Cleaning Tips for Snowmobile Helmet

However, it is always better for you to consult your owner’s manual before trying any of these methods at home, just in case something goes wrong and voids the warranty!

Step 1: Grab the cleaning material

The best way to keep a motorcycle helmet clean is by getting things organized from the beginning. You’ll want to make sure that everything has its place and you don’t end up wasting time cleaning items when they can be put back into use on another day, like your goggles or gloves! There is some cleaning material to do that in order, such as:

  • Microfiber rags
  • Toothbrush
  • Baby shampoo
  • Warm water
  • Compressed air

Step 2: Remove External or Electronics

It sounds incredibly basic (and it is), but this step should be the first thing you do when cleaning your motorcycle helmet. Not only will removing any electronic accessories from within make for a safer and more sanitary experience.

Step 3: Remove Interior lining

Removing the internal lining and cheek pads is usually a simple process. Be sure to check your owner’s manual for specifics, but in most cases, comfort/style liners attach with snaps or hook-and-loop material that can be removed easily enough once you’ve got them undone.

Step 4: Prepare The Outer Shell

The microfiber towels are a great way to gently loosen up dirt and bugs, as long as your know-how. Soak one in warm water before using it on your helmet or face shield for an easier clean-up later with less risk of scratching either item during this process!

Step 5: Clean The Linings

To clean it properly, all one needs are baby shampoo or any gentle soap/ Detergent meant for washing babies’ clothes in water filled with warm tap water. Make sure not too much suds over surfaces as these make cleaning difficult when trying again later on after spots have been missed. Doing the next section over top ensures everything gets cleaner than before.

See also  Why Do Harley Riders Wear Full-Face Helmets? [Get Your Answer]

Step 6: Time to Exterior Cleaning

After getting rid of the wet rag that you put on your helmet in Step 4, depart the face shield and set it apart. Use a new microfiber cloth to gently work around the exterior of the helmet while wiping away dirt from any spots hard-to-reach with a toothbrush (like between vents).

Final Step: Blow Out Vents and Dry

Sometimes, in the heat of riding hard and fast on your bike, you will trip over a rock. But don’t worry! With an air compressor at hand (not just any old can), blowing out all those blocked vent channels is easy-peasy lemon squeezy.

Thankfully, all we have to do to clear up these small obstructions from getting any worse is use an air compressor for just long enough until everything flows again!


The most important rule of thumb for a helmet is that it should be replaced every five years. Made from fiberglass or plastic, they become brittle over time and can cause harm to both you as well the durability; so try putting some reflective tape on after dark just in case!

Another great reason why many people replace their helmets often is because each new model comes out with better protection features which make saving up worthwhile when safety matters at heart. However, we hope that with a little help now you got how to wire a heated snowmobile helmet.

Leave a comment

Your email address will not be published.